Milling
H65E
4 Flute End Mills for Hardened Steel & Heat-Resistant machining
H65 Series, manufactured from ultra-fine micro grain Solid Carbide and Cobalt alloy, is specially designed to cater to difficult to cut materials. These 4-flute end mills with their superior helix design, precise edge preparation and special PVD coating is best suited for groove milling, side/shoulder milling, face milling and slot milling operations in difficult-tomachine material with hardness till 62 HRC such as hardened steel and heat resistant metal. These are most commonly used in die and mould, defense, automotive and general engineering industries.
| Item Code | Diameter | Shank Diameter | Cutting Length | Overall Length |
|---|---|---|---|---|
| H65E 1.0xD4x4x50 | 1.00 | 4.0 | 4.0 | 50.0 |
| H65E 1.0xD4x6x75 | 1.00 | 4.0 | 6.0 | 75.0 |
| H65E 1.0xD4x8x100 | 1.00 | 4.0 | 8.0 | 100.0 |
| H65E 1.5xD3x4x50 | 1.50 | 3.0 | 4.0 | 50.0 |
| H65E 1.5xD3x6x75 | 1.50 | 3.0 | 6.0 | 75.0 |
| H65E 1.5xD3x8x100 | 1.50 | 3.0 | 8.0 | 100.0 |
| H65E 1.5xD4x4x50 | 1.50 | 4.0 | 4.0 | 50.0 |
| H65E 1.5xD4x6x75 | 1.50 | 4.0 | 6.0 | 75.0 |
| H65E 1.5xD4x8x100 | 1.50 | 4.0 | 8.0 | 100.0 |
| H65E 2.0xD4x6x50 | 2.00 | 4.0 | 6.0 | 50.0 |
| H65E 2.0xD2x6x50 | 2.00 | 2.0 | 6.0 | 50.0 |
| H65E 2.0xD4x8x75 | 2.00 | 4.0 | 8.0 | 75.0 |
| H65E 2.0xD2x8x75 | 2.00 | 2.0 | 8.0 | 75.0 |
| H65E 2.0xD4x12x100 | 2.00 | 4.0 | 12.0 | 100.0 |
| H65E 2.0xD2x12x100 | 2.00 | 2.0 | 12.0 | 100.0 |
| H65E 2.5xD4x8x50 | 2.50 | 4.0 | 8.0 | 50.0 |
| H65E 3.0xD3x8x50 | 3.00 | 3.0 | 8.0 | 50.0 |
| H65E 3.0xD3x12x75 | 3.00 | 3.0 | 12.0 | 75.0 |
| H65E 3.0xD3x15x100 | 3.00 | 3.0 | 15.0 | 100.0 |
| H65E 3.0xD4x8x50 | 3.00 | 4.0 | 8.0 | 50.0 |
| H65E 3.0xD4x12x75 | 3.00 | 4.0 | 12.0 | 75.0 |
| H65E 3.0xD4x15x100 | 3.00 | 4.0 | 15.0 | 100.0 |
| H65E 4.0xD4x10x50 | 4.00 | 4.0 | 10.0 | 50.0 |
| H65E 4.0xD4x15x75 | 4.00 | 4.0 | 15.0 | 75.0 |
| H65E 4.0xD4x20x100 | 4.00 | 4.0 | 20.0 | 100.0 |
| H65E 4.0xD4x25x150 | 4.00 | 4.0 | 25.0 | 150.0 |
| H65E 5.0xD5x13x50 | 5.00 | 5.0 | 13.0 | 50.0 |
| H65E 5.0xD5x20x75 | 5.00 | 5.0 | 20.0 | 75.0 |
| H65E 5.0xD5x25x100 | 5.00 | 5.0 | 25.0 | 100.0 |
| H65E 5.0xD5x35x150 | 5.00 | 5.0 | 35.0 | 150.0 |